SCHUNK LDN-DG-0600, Сборка и руководство по эксплуатации

Страница: 128 / 146

Maintenance and repair work
126 04.00|LDN |en
Replacing the brake piston
1 Brake cover 2 Retaining ring
3 O-ring 4 Disk spring
5 Brake piston
1 Using a vise, clamp the brake cover (1).
2 Remove the retaining ring (2).
3 Slowly loosen the vise.
4 Remove the brake cover (1), O-ring (3) and disk springs (4).
5 Using pliers (with braces), pull out the brake piston (5).
1 Slightly grease and insert the O-ring (3).
2 Insert the brake piston (5) and fit the membrane into place.
3 Fit the disk springs (4) and the brake cover (1).
4 Set the vise onto the brake cover (1) and press in the cover.
5 Fit the retaining ring (2).
6 Loosen and remove the vise.
NOTICE
When installing the disk springs (4), make sure the individual disk
springs are placed in the correct position.
• Short slides are equipped with 5 disk springs
• Long slides with double brakes are each equipped with 4 disk
springs
Uninstalling the bra-
ke piston
Installing the brake
piston