SCHUNK LDN-DG-0600, Сборка и руководство по эксплуатации

Страница: 119 / 146

Maintenance and repair work
04.00|LDN |en 117
Guided slide – Changing the support rollers on the eccentric side
Support roller change on eccentric side
1 Remove the 2 roller covers (1).
2 Unscrew the 8 pressure pins (2).
3 Pull out the 4 eccentric shafts (3) using the extracting tool (4).
4 Remove the 4 support rollers (5).
1 Fit the 5 support rollers (4).
2 Turn to fit the 4 eccentric shafts (3) into place.
3 Turn the eccentric shaft (3) using a hexagon socket wrench un-
til you can no longer turn the support roller (5) by hand.
4 Check the initial tension
(

10.7, Page 118)
5 Screw in the 8 new pressure pins (2) – tightening torque of 2 Nm.
6 Fit the 2 roller covers (1).
10.6
Uninstalling the sup-
port rollers
Installing the support
rollers