SCHUNK LDN-DG-0600, Сборка и руководство по эксплуатации

Страница: 112 / 146

Maintenance and repair work
110 04.00|LDN |en
WARNING
Risk of crushing at the moving linear axes
Fingers may get crushed
• Wear protective gloves.
WARNING
For safety reasons, maintenance work may only be carried out
on a unit which has been switched off and depressurized.
Certain maintenance work however (e.g. setting the operating
pressure) requires a system that is ready to operate.
• Only carry out maintenance work which is described in this
document or for person who have been trained and author-
ized.
NOTE
The maintenance work can either be carried out by the
customer, the person responsible for the technical care of the unit,
or by the manufacturer's service technicians.
If the customer is responsible for performing maintenance work
on the unit, we recommend participating in a training course at
the manufacturer's. In this training course you will be instructed in
the correct way to do maintenance work.
Overview
Overview linear motor axes
1 End plate 2 Guide block 3 Motor housing
4 Motor connector 5 Guide blade carrier 6 Measuring system
10.1