_________________________________________________________________________________________
schunk.com
XND.00015.012_A – 10/2018
30
9.4
Removing and replacing parts
Installation
Place the 0432255 adapter plate on to the fixed jaw
Tighten 4 x cylinder screws M12 x 25 with 65 Nm
in crosswise sequence
Place the 0432256 swivel plate on to the movable jaw
Tighten 2 x cylinder screws M12 x 25 with 65 Nm
9.5
Fitting the 6-fold reversible jaws
Determine the mounting positions of the 6-fold reversible jaws.
The best clamping results are achieved when clamping parts as far out as possible.
Move the cover screws so that the selected clamping position is available.
Position the 6-fold reversible jaws and loosely insert the M12 cylinder screws.
Turn the 6-fold reversible jaws on to the required clamping faces; slightly pre-clamp the work-
piece with the clamping jaws so that the clamping faces are parallel to, and touch,
the workpiece.
Use a torque of 80 Nm to tighten the M12 cylinder screws of the 6-fold reversible jaws.
Attention:
When the clamping faces of the jaws are not aligned parallel to the workpiece
surface it is possible that the 6-fold reversible jaw becomes loose through the
clamping force
.
