Translation of the original declaration of incorporation
54
05.00|21151452 KSP plus-IN, KSP-LH plus-IN, KSP plus-IN2, KSP-LH plus-IN2 |en
Translation of the original declaration of
incorporation
in terms of the Directive 2006/42/EG, Annex II, Part 1.B of the European Parliament and of
the Council on machinery.
Manufacturer/
Distributor
H.-D. SCHUNK GmbH & Co. Spanntechnik KG
Lothringer Str. 23
D-88512 Mengen
We hereby declare that on the date of the declaration the following partly completed
machine complied with all basic safety and health regulations found in the directive
2006/42/EC of the European Parliament and of the Council on machinery. The declaration
is rendered invalid if modifications are made to the product.
Product
designation:
TANDEM clamping force block, pneumatic
Type
designation:
KSP plus 100-IN; KSP-LH plus 100-IN; KSP-Z plus 100-IN; KSP-LH-Z plus
100- IN; KSP plus 160-IN; KSP-LH plus 160-IN; KSP-Z plus 160-IN; KSP-LH-Z
plus 160-IN; KSP plus 250-IN; KSP-LH plus 250-IN; KSP-Z plus 250-IN; KSP-
LH-Z plus 250-IN; KSP plus 100-IN2; KSP-LH plus 100-IN2; KSP-Z plus 100-
IN2; KSP-LH-Z plus 100-IN2; KSP plus 160-IN2; KSP-LH plus 160-IN2; KSP-Z
plus 160-IN2; KSP-LH-Z plus 160-IN2; KSP plus 250-IN2; KSP-LH plus 250-
IN2; KSP-Z plus 250-IN2; KSP-LH-Z plus 250-IN2
ID number
0405207;0405227;0405208;0405228;0405307;0405327;0405308;
0405328;0405507;0405527;0405508;0405528;1349646;1349647;
1349648;1349649;1349650;1349651; 1349664;1349665;1349666;
1349667;1349668;1349670
The partly completed machine may not be put into operation until conformity of the
machine into which the partly completed machine is to be installed with the provisions of
the Machinery Directive (2006/42/EC) is confirmed.
Applied harmonized standards, especially:
ISO 12100:2010
Safety of machinery - General principles for design -
Risk assessment and risk reduction
EN ISO 4414:2010
Pneumatic fluid power – General rules and safety requirements
for systems and their components
Other related technical standards and specifications:
VDI 3035:2008-05
Design of machine tools, production lines and peripheral
equipment for the use of metalworking fluids
The manufacturer agrees to forward on demand the relevant technical documentation for
the partly completed machinery in electronic form to national authorities.
The relevant technical documentation according to Annex VII, Part B, belonging to the
partly completed machinery, has been created.
Person authorized to compile the technical documentation:
Philipp Schräder, Address: see manufacturer's address
Mengen, May 2018
p.p. Philipp Schräder; Head of Engineering Design
10
