SCHUNK KSP plus-IN Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 56

background image

Basic safety notes

05.00|21151452 KSP plus-IN, KSP-LH plus-IN, KSP plus-IN2, KSP-LH plus-IN2 |en

11

• Wear protective gloves and safety goggles when handling

hazardous substances.

• Wear close-fitting protective clothing and also wear long hair in

a hairnet when dealing with moving components.

Notes on safe operation

Incorrect handling of the personnel

Incorrect handling and assembly may impair the product's safety

and cause serious injuries and considerable material damage.
• Avoid any manner of working that may interfere with the

function and operational safety of the product.

  •  Use the product as intended.
  •  Observe the safety notes and assembly instructions.
  •  Do not expose the product to any corrosive media. This does

not apply to products that are designed for special

environments.

  •  Eliminate any malfunction immediately.
  •  Observe the care and maintenance instructions.
  •  Observe the current safety, accident prevention and

environmental protection regulations regarding the product's

application field.

IMPORTANT!

Following a longer shutdown period (more than approx. 6 hours),

always re-tension the clamping device in order to compensate for

the setting properties of the clamping situation or possible

pressure losses and the resulting loss of clamping force.

Transport

Handling during transport

Incorrect handling during transport may impair the product's

safety and cause serious injuries and considerable material

damage.
• When handling heavy weights, use lifting equipment to lift the

product and transport it by appropriate means.

• Secure the product against falling during transportation and

handling.

• Stand clear of suspended loads.

2.9

2.10

«
...
9
10
11
12
13
...
»

Содержание KSP plus-IN

























































Отзывы:

Нет отзывов

Похожие инструкции для KSP plus-IN

Бренд: Tanco Страницы: 72

Бренд: HABYS Страницы: 16

Бренд: Acterna Страницы: 72

Бренд: Walker Bay Страницы: 8

Бренд: ZIGBEE Страницы: 6

Бренд: Daisy Страницы: 2

Below Ground Pool Cover Box

Бренд: Daisy Страницы: 3

Бренд: e+p Elektrik Handels Страницы: 2

Бренд: Fellowes Страницы: 20

Бренд: GARANT Страницы: 239

Бренд: p-light Страницы: 36

Бренд: M-system Страницы: 2

Бренд: Rico Страницы: 34

Бренд: LANGER EMV-Technik Страницы: 25

Electric Clamshell CSE12-208VCD

Бренд: Lang Страницы: 16

Бренд: Pahlen Страницы: 20

Бренд: Paia Страницы: 7

Бренд: Palmer Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды