_________________________________________________________________________________________
schunk.com
XND.00020.002_A – 10/2018
23
KSC 125 L-300
The basic model includes the following interfaces:
4 x Ø12 H7 positioning holes, centre distance 50 mm. These can be used to position and
attach the vice from above on grid plates with a 50 mm grid, as well as on T-slot tables.
(Fitting screws Ø12 F7 / M12 or cylinder screws M12)
VERO-S interface with 2 x location holes Ø25 H6 and centre distance 200 mm.
Lateral longitudinal slots for fixing with
clamping claws.
Transverse alignment in T-slot is possible with
the help of the alignment and centring set.
The KSC can also be produced at the factory with customer-specific positioning and
fixing holes as well as with location recesses for various commonly available zero point
clamping systems.
For further data, and accessoires, please see the current catalogue >> Schunk stationary
Workholding <<
4.2
Jaw range
The reliable function of the clamping device is significantly affected by the selection
of the correct jaws.
For further data, please see the current catalogue >> Schunk stationary Workholding <<
