SCHUNK KGG 100, Сборка и руководство по эксплуатации

Страница: 22 / 52

Assembly
22 17.00 | KGG | Assembly and Operating Manual | en | 389166
5.3 Mounting the sensor
NOTE
Observe the assembly and operating manual of the sensor for
mounting and connecting.
The product is prepared for the use of sensors.
• For the exact type designations of suitable sensors, please see
catalog datasheet and Overview of sensors [ } 22].
• For technical data for the suitable sensors, see assembly and
operating manual and catalog datasheet.
– The assembly and operating manual and catalog datasheet
are included in the scope of delivery for the sensors and are
available at schunk.com.
• Information on handling sensors is available at schunk.com or
from SCHUNK contact persons.
5.3.1 Overview of sensors
Overview of sensor technology
Designation KGG
60-20 60-40 70-24 70-48 80-30 80-60 100-40 100-80 140-60
Inductive proximity switch
IN 40 X X X X X X X X X
Magnetic switch MMS 22 X X X X X X X X X
Reed switch RMS 22 X X X X X X X X X
Programmable magnetic
switch MMS 22-PI2 X - X - - - - - -
Programmable magnetic
switch MMS-P 22 X - X - X - - - -
Programmable magnetic
switch MMS 22-PI1 X X X X X X X X X
Magnetic switch
MMS 22-IOL X - X - - - - - -
Analog magnetic switch
MMS 22-A X - X - - - - - -
Radio system RSS R1/T2 X X X X X X X X X