Basic safety notes
16
03.00 | GM 80 – 201 | Assembly and Operating Manual | en | 389092
NOTE
• The equipotential bonding must be installed by a specialist
electrician in line with the applicable regulations, paying
particular attention to the actual conditions in the working
environment.
• The effectiveness of the equipotential bonding must be verified
by a specialist electrician through regular safety measurements.
WARNING
Risk of injury from crushing and impacts!
Serious injury could occur during the base jaw procedure and
when breaking or loosening the gripper fingers.
•
Wear suitable protective equipment.
•
Do not reach into the open mechanism or the movement area
of the product.
WARNING
Risk of injury from objects falling and being ejected!
Falling and ejected objects during operation can lead to serious
injury or death.
•
Take appropriate protective measures to secure the danger
zone.
WARNING
Risk of injury from unexpected movements!
If the energy supply is switched on or residual energy remains in
the system, parts may move unexpectedly and cause serious
injuries.
•
Switch off the energy supply.
•
Make sure no residual energy is in the system.
