Translation of original declaration of incorporation
03.00 | ERS 135 - 210 / 560V | Assembly and Operating Manual | en | 389064
53
8 Translation of original declaration of incorporation
in terms of the Directive 2006/42/EG, Annex II, Part 1.B of the European Parliament and of
the Council on machinery.
Manufacturer/
Distributor
SCHUNK GmbH & Co. KG Spann- und Greiftechnik
Bahnhofstr. 106 – 134
D-74348 Lauffen/Neckar
We hereby declare that on the date of the declaration the following partly completed
machine complied with all basic safety and health regulations found in the directive
2006/42/EC of the European Parliament and of the Council on machinery. The declaration
is rendered invalid if modifications are made to the product.
Product designation:
Electrical turning unit with torque motor / ERS 135 - 210 /
560V / electric
ID number
0310146 ... 0310224
The product also complies with
LVD Directive (2014/35/EU)
.
Applied harmonized standards, especially:
EN ISO 12100:2010
Safety of machinery - General principles for design -
Risk assessment and risk reduction
EN 60204-1: 2006
Safety of machinery – Electrical equipment of machines, Part 1:
General requirements
DIN EN 61000-6-2:
2011-06
Electromagnetic compatibility (EMC) - Part 6-2: Generic
standards- Immunity for industrial environments
EN 61000-6-4:2007 +
A1:2011
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards
- Emission standard for industrial environments
(IEC 61000-6-4:2006 + A1:2010);
ISO 9409-1:2004-03
Manipulating industrial robots - Mechanical interfaces - Part 1: plates
The partly completed machine may not be put into operation until conformity of the
machine into which the partly completed machine is to be installed with the provisions of
the Machinery Directive (2006/42/EC) is confirmed.
The manufacturer agrees to forward on demand the relevant technical documentation for
the partly completed machinery in electronic form to national authorities.
The relevant technical documentation according to Annex VII, Part B, belonging to the
partly completed machinery, has been created.
Person authorized to compile the technical documentation:
Robert Leuthner, Address: see manufacturer's address
Lauffen/Neckar, April 2019
p.p. Ralf Winkler, Manager for development of
gripping system components
