Assembly and settings
01.00 | ECG | Assembly and Operating Manual | en | 389769
23
5.2.3.4 Terminal holding force (X1, supplementary printed circuit board)
The holding force level is preselected via the "holding force" (X1)
terminal.
Pin
Description
1
0V
GND
2–9
IN1–IN8 Preselection holding force level 1–8
10
+24 VDC Connection 24 VDC
5.2.3.5 Magnet status terminal (X1)
The status outputs of the magnet system are connected to the
"Display magnet status" terminal (X1).
Terminal
Description
1 COM
Communication contact, shared connection
2 NO
Normally open contact in the event of demagnetized
system
3 NC
Normally closed contact in the event of
demagnetized system
