Assembly
04.00 | AGE-S-XYZ | Assembly and Operating Manual | en | 389004
19
AGE-S-XY with MMS-
K 65/S
NOTE
For assembly of the magnetic switches, bore holes have been
integrated into the housing.
To set a switching position (piston stroke control), proceed as
follows:
Compensation unit unlocked:
Ø
Unlock compensation unit.
Ø
Push O-ring (58) onto the magnetic switch (M1).
Ø
Lay the cable of the magnetic switch into the groove of the
clamping element (17). (O-ring (58) should be located between
magnetic switch and clamping element (17))
Ø
Push the magnetic switch 1 (M1) with the clamping element
(17) into the bore hole on the housing until the magnetic switch
touches the base of the borehole.
Ø
Turn the magnetic switch on the cable about its own axis until it
switches.
Ø
Fix the magnetic switch (M1) in this position and clamp it by
tightening the screw (59).
Ø
Test the function by locking and unlocking the compensation
unit.
