SCHUNK ADR-C, Сборка и руководство по эксплуатации

Страница: 16 / 32

Assembly
16 02.00 | Jaw turning rings | Assembly and Operating Manual | en | 0189701
5.2 Assembling the clamping pins
1 ADR clamping diameter
2 Workpiece clamping diameter
Formula when using 3 clamping pins of the same height :
ADR clamping diameter = ( r + h ) x 2
Depending on the required ADR clamping diameter, the product
can either be used directly or fitted with clamping pins.
1. Select suitable jaw turning ring and clamping pins:
✓
For combination specifications ADR-C/ADR-C2,
see
} 5.2.1 [
/
18] .
✓
For combination specifications ADR-S, see } 5.2.2 [
/
22] .
2. Screw the clamping pin into the jaw turning ring as far as the
stop. Observe the specified tightening torques for the clamping
pins
}
3 [
/
13] .
NOTE: For more finely graduated intermediate diameters, the
clamping pins can be milled. The clamping pins can be reordered
as spare part sets.