SCHUNK ADR-C, Сборка и руководство по эксплуатации

Страница: 17 / 32

Assembly
Examples of using clamping pins of different heights
• To clamp the chuck jaws of a lathe chuck to a diameter of 370
mm, ADR and clamping pins must be combined as follows, in
accordance with the combination specifications
}
5.2.1 [
/
18] :
1 x jaw turning ring with Ø 317 mm, 2 x clamping pins with
height h = 30 mm.
• To clamp the chuck jaws of a lathe chuck to a diameter of 196
mm, ADR and clamping pins must be combined as follows, in
accordance with the combination specifications
} 5.2.2 [
/
22] :
1 x jaw turning ring with Ø 164 mm, 2 x clamping pins with
height h = 18 mm, 1 x clamping pin with height h = 15 mm.
IMPORTANT! The height difference between the clamping pins
must not exceed 3 mm!
17 02.00 | Jaw turning rings | Assembly and Operating Manual | en | 0189701