6
3. Settings
3.1 Seat tilt
The FLOYD seat can be adjusted by 30° in
the basic position using the gas pressure
spring. You must press the trigger lever (A) on
the right side on the push bar or push handle
or assist by lightly pulling or pushing. Once the
required seat angle has been achieved, the gas
pressure spring is blocked again by releasing the
trigger lever.
A
There is an increased risk of tip-
ping over with a tilted seat! We
therefore recommend using the
optional anti tip bar.
3.2 Back angle adjustment with snap joint
The back frame can be precisely adjusted in the
angle to the seat frame. The adjustment is made
after loosening the two star handles (B) on the
right and left at the lower end of the back frame.
Always hold the back with one hand when adjus-
ting.
The back can also be fully folded down onto the
seat frame for easier transport.
There is an increased risk of tipping
over when adjusting the back more
than 90° to the seat frame!
B
