•
5
•
8.3 Grounding methods
Grounding Methods
9. ASSEMBLY INSTRUCTIONS
No assembly required.
10. PRODUCT FEATURES
1.
Charger Status LEDs (located on side of unit)
2.
Battery clamp output cord
3.
30 Pin XLR 3-12C output cord
4.
3/8˝ dia. ring terminal output cord
5.
AC cord
1
2
3
4
5
11. MOUNTING CHARGER TO A FLAT SURFACE
Do not mount charger in a location with restricted air flow. The area where
the charger is to be fastened must be dry, well ventilated and away from any
combustible material and fumes.
11.1
Turn off and disconnect charger.
11.2
Place the back of the charger with mounting bracket against a secure, flat surface.
11.3
Securely mount charger to a flat surface with a minimum of one and a half inches of
clearance on each side.
