Schulze BS-350 LST Скачать руководство пользователя страница 23

Страница: 23 / 80

Safety

Actions in case of danger and accident 3.11

Table saw BS-350 LST, BS-400 LST-E230, BS-400 LST-E400, BS-500 LST

/80

3.11

Actions in case of danger and accident

Preventative measures

In the event of danger, the following preventive measures must generally be
taken:

−

Always be prepared for accidents.

−

Keep first aid equipment (first aid kit, blankets, etc.) and fire extinguishers

at hand.

−

Always keep the approaches for rescue vehicles free.

Handle accidents properly

In the case of an accident, the following rules of conduct should be ob-
served:

−

Immediately trigger emergency stop.

−

Take first aid measures.

−

Remove affected persons from the danger zone.

−

Inform those in charge at the site.

−

Call a doctor and/or the fire service in case of serious injuries.

−

Always keep the approaches for rescue vehicles open.

3.12

Spare parts

Only spare parts specified by Dr. Schulze GmbH may be used. The infor-
mation in the parts lists and/or spare parts lists is decisive in this case.

Other parts can influence the safety functions and the behavior of the ma-
chine. They may not, therefore, be used.

Date of use

Spare parts, which have exceeded the maximum date of use, may no longer
be used.

Содержание BS-350 LST

















































































Результаты поиска

Содержание BS-350 LST

Отзывы:

Бренды по названию

Популярные бренды

Schulze BS-350 LST, Оригинальное руководство по эксплуатации

Результаты поиска

Содержание BS-350 LST

Отзывы:

Бренды по названию

Популярные бренды