background image

Schluter

®

-DITRA-HEAT Thermostat  

3-Year Limited Warranty

 

COVERAGE AND CONDITIONS:

 Subject to the conditions and 

limitations as stated hereinafter, 

Schluter

®

-Systems*

 warrants that the  

Schluter

®

-DITRA-HEAT thermostat

 (the “Product”)** will be free of 

manufacturing defects for a period of three (3) years from the date of 

purchase only when the Product is used and installed in accordance 

with the terms and conditions of the Schluter

®

-DITRA-HEAT Thermostat 

User’s Guide  and industry standard guidelines that are not in conflict 

with User’s Guide in effect at the time of installation. This warranty is 

conditioned and will be considered null and void and Schluter

®

-Systems 

will have the right to refuse any claims if : (a) resulting from faulty 

installation or improper storage, (b) any Schluter product  comprising 

the system has been altered or otherwise modified in any way without 

the prior written authorization of Schluter

®

-Systems, (c) an abusive or 

abnormal use, lack of maintenance, improper maintenance or use other 

than that for which the Product was manufactured. It is the responsibility 

of the owner/ builder/ installer to ensure the suitability of all building 

materials and all associated building materials for the owner’s intended 

use. It is recommended that the owner consult with an experienced and 

professional installer and qualified electrician.  

RESOLUTION:

 If the Product fails to meet this warranty, then the 

owner’s exclusive remedy and the sole obligation of Schluter

®

-Systems, 

at its election, shall be to repair or replace the Product. This warranty 

does not cover the cost of disconnection, transport, and installation.

If at any time during the warranty period the unit becomes defective, you 

must cut off the power supply at the main electrical panel and contact 

1) your installer or distributor or 2) Schluter

®

-Systems‘ customer service 

department.

DISCLAIMER:

 THERE ARE NO WARRANTIES BEYOND THIS 

EXPRESSED WARRANTY AS STATED ABOVE. ALL OTHER 

WARRANTIES, REPRESENTATIONS OR CONDITIONS, EXPRESSED 

OR IMPLIED, ARE DISCLAIMED AND EXCLUDED, INCLUDING 

WARRANTIES, REPRESENTATIONS OR CONDITIONS OF 

MERCHANTABILITY

 OR FITNESS FOR A PARTICULAR PURPOSE 

ARISING BY STATUTE OR OTHERWISE BY LAW OR FROM A 

COURSE OF DEALING OR USAGE OF TRADE. SCHLUTER-SYSTEMS 

EXCLUDES AND IN NO EVENT SHALL HAVE ANY LIABILITY FOR 

LOST PROFITS OR ANY OTHER INDIRECT, SPECIAL,  

18

Содержание DH E RS /BW





















Отзывы: