Schulte SBX-75/87 Скачать руководство пользователя страница 68 | Manualshive

Страница: 68 / 104

background image

OPERATION

SBX-75/87 04/19

Operation Section 4-28

© 2019 Alamo Group Inc.

OPERA

T

ION

12.1 Starting the Tractor

The procedure to start the tractor is model specific.
Refer  to  the  tractor  operator’s  manual  for  starting
procedures  for  your  particular  tractor.  Consult  an
authorized  dealer  if  the  starting  procedure  is
unclear.  Ensure  the  3-point  control  lever  is  in  the
lowered position and the PTO is disengaged before
starting the tractor.

12.3 Driving the Tractor and Snow Blower

Start off driving at a slow speed and gradually increase your speed while maintaining complete control of the
tractor and snow blower. Moving slowly at first will also prevent the tractor from rearing up and loss of steering
control. The tractor should never be operated at speeds that cannot be safely handled or which will prevent the
operator from stopping quickly during an emergency. If the power steering or engine ceases operating, stop
the tractor immediately as the tractor will be difficult to control.

12.2 Brake and Differential Lock Setting

Make sure the tractor brakes are in good operating
condition.  Tractor  brakes  can  be  set  to  operate
independently  allowing  single  rear  wheel  braking
action  or  locked  together  to  provide  simultaneous
rear  wheel  braking.    FOR  MOST  DRIVING  AND
OPERATING CONDITIONS, THE BRAKE PEDALS
SHOULD BE LOCKED TOGETHER TO PROVIDE
THE MOST EFFECTIVE BRAKING ACTION.

Always disengage the tractor differential lock when
turning.  When  engaged  the  differential  lock  will
prevent  or  limit  the  tractor  from  turning.  During
normal  cutting  conditions,  locking  the  differential
provides no benefit and should not be used.

OPS-

U- 0013

Be aware of the operating conditions. Do not operate the Tractor with weak or faulty brakes.
When operating down a hill or on wet or rain slick roads, the braking distance increases; use
extreme care and reduce your speed in these conditions. When operating in traffic, always
use the Tractor’s flashing warning lights and reduce your speed. Be aware of traffic around
you and watch out for the other guy.

«
...
66
67
68
69
70
...
»

Содержание SBX-75/87









































































































Отзывы:

Нет отзывов

Похожие инструкции для SBX-75/87

Бренд: EGO Страницы: 120

Бренд: Simplicity Страницы: 24

Бренд: Echo Страницы: 5

Бренд: SNOWJOE Страницы: 16

Бренд: Kongskilde Страницы: 8

Бренд: PROFIX Страницы: 40

Бренд: Scheppach Страницы: 8

TrimmerPlus ST720r

Бренд: MTD Страницы: 36

Бренд: SNOWJOE Страницы: 24

Бренд: SNOWJOE Страницы: 56

Martha Stewart MTS-EBS215

Бренд: SNOWJOE Страницы: 12

Бренд: Schmalz Страницы: 2

SGBL-DG-1600-300-SO

Бренд: Schmalz Страницы: 6

Бренд: Schmalz Страницы: 6

Бренд: Parker Страницы: 7

Бренд: Parker Страницы: 14

Бренд: Parker Страницы: 14

Бренд: Toro Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды