Schulte Heizstab 5, Руководство пользователя

Страница: 44 / 64

User manual — Heizstab 5
Symptom Possible cause Adviced action
BLUE diode does not light (lack
of IR communication)
Problem in
the external
programmer
Check the batteries
Place the programmer close to the heating
element and change the temperature setting
- if the devices communicate correctly, LED
diode lights blue and blinks after each order
correctly received.
Problem with
the heating
element
contact the Distributor
YELLOW and RED diode light
but radiator still cool
Thermal fuse
or electronics
damaged
contact the Distributor
BLUE diode lights but radiator
still cool
Room tempera -
ture is equal or
higher than the
one set in exter-
nal programmer
Everything is working.
(Note: Turning the controller ‘OFF’ will not
terminate the connection between the heat -
ing element and the controller, the only way
to do this is to remove the batteries from the
controller or move it to another room)
BLUE diode pulsing The heating
element is no
longer commu -
nicating with the
IR controller
Is the controller still in 'line of site' of the
heating element or is it being blocked by
an object or has it been placed in another
room, clear the obstruction or move the
controller. Check the batteries. If not and the
problem still exists - contact the Distributor
Construction of the device as well as phys -
ical characteristics of different heating me -
diums, may cause an uneven tempera -
ture distribution in the radiator, which may
cause that bottom pipes as well as the the
highest one can be cold. This type of behav
-
ior is absolutely normal and is not an effect
of the heater malfunction.
44