Schulte FM-350, Руководство оператора

Страница: 32 / 70

ASSEMBLY
FM-350 10/14 Assembly Section 3-2
© 2014 Alamo Group Inc.
ASSEMBL
Y
Attachment to the Tractor
Bolting the Frame Mounting Bracket to your Tractor
Bolt the frame mounting bracket to your tractor frame using the bolts supplied. Any special instructions will be
included with your, tractor specific, mounting frame.
Measuring your Tractor and Setting the Frame Length
Set the tractor drawbar length. Set dimension 'B' as follows:
Measure the length of your tractor. Measure
dimension 'A', from the frame mounting plate where
it contacts the tractor to the center of the hitch pin.
Record this dimension.
Disconnect hydraulic hose and remove bolts so that the inner and outer frame can be slid in and out. Set the
frame length as follows:
Tractor PTO Type Dimension ‘B’
1000 RPM, 1-3/8-21 16”
1000 RPM, 1-3/4-20 20”
540 RPM, 1-3/8-6 14”
Snow Blower / Plow Model and
Tractor PTO Type
Dimension ‘C’ Dimension ‘D’
1000 RPM, 1-3/8-21, SDX-110, SDX-117 ‘A’ plus 8-1/4” 23-1/2”
1000 RPM, 1-3/4-20, SDX-110, SDX-117 ‘A’ plus 6-3/4” 22”
1000 RPM, 1-3/8-21, SDX-960 ‘A’ plus 8-1/4” 23-1/2”
1000 RPM, 1-3/4-20, SDX-960 ‘A’ plus 5-3/4” 21”
1000 RPM, 1-3/8-6, SDX-960 ‘A’ plus 8-3/4” 24”
ALL TRACTORS, V-PLOW ‘A’ plus 7-3/4” ---