Schulte FM-350, Руководство оператора

Страница: 38 / 70

ASSEMBLY
FM-350 10/14 Assembly Section 3-8
© 2014 Alamo Group Inc.
ASSEMBL
Y
Initial Set-up for Schulte RDX-960, RDX-102 and SDX-117 Snow Blowers
On the RDX-960 and RDX-102 snow blowers, position the lower 3PT hitch arms so that the lower pins are as
close as possible to the snow blower housing. When attaching the front mount frame's top link use 24" upper
hole position.
Initial Set-up for Schulte SV Plows
For the highest lift possible, install the three hitch ears in the lowest set of holes on the V-Plow as shown. Be
aware of dimension ‘E’ from page 3-4 that the cylinders are not extended so far to limit downward travel in
uneven terrain. If needed, move all three hitch ears up to gain range of motion - always maintain the 24”
spacing to the top link.
With the machine parked on level ground, adjust the top link of the FM-350 to level the blades to the ground
(on level ground, this should make the main pin on the V-Plow vertical).