Schulte DHX-360 Скачать руководство пользователя

Страница: 11 / 82

SAFETY

DHX-360/DHX-600 03/21

Safety Section 1-3

Operator Safety Instructions and Practices

Never operate the Tractor or Implement until you have read and

completely understand this Manual, the Tractor Operator’s Manual, and

each of the Safety Messages found in the Manual or on the Tractor and

Implement. Learn how to stop the tractor engine suddenly in an

emergency. Never allow inexperienced or untrained personnel to operate

the Tractor or Implement without supervision. Make sure the operator

has fully read and understood the manuals prior to operation.

(SG-4)

The operator and all support personnel should wear hard hats, safety

shoes, safety glasses, and proper hearing protection at all times for

protection from injury including injury from items that may be thrown by

the equipment.

(SG-16)

PROLONGED EXPOSURE TO LOUD NOISE MAY CAUSE

PERMANENT HEARING LOSS! Tractors with or without an Implement

attached can often be noisy enough to cause permanent hearing loss.

We recommend that you always wear hearing protection if the noise in

the Operator’s position exceeds 80db. Noise over 85db over an

extended period of time will cause severe hearing loss. Noise over 90db

adjacent to the Operator over an extended period of time will cause

permanent or total hearing loss.

NOTE:

Hearing loss from loud noise

[from tractors, chain saws, radios, and other such sources close to the

ear] is cumulative over a lifetime without hope of natural recovery.

(SG-I7)

Always read carefully and comply fully with the manufacturer’s

instructions when handling oil, solvents, cleansers, and any other

chemical agent.

(SG-22)

KEEP AWAY FROM ROTATING ELEMENTS to prevent entanglement

and possible serious injury or death.

(SG-24)

Never allow children to play on or around Tractor or Implement. Children can slip or fall off

the Equipment and be injured or killed. Inadvertent contact with controls can cause the

Implement to shift or fall crushing themselves or others.

(SG-25)

Содержание DHX-360



















































































Результаты поиска

Содержание DHX-360

Отзывы:

Похожие инструкции для DHX-360

Бренды по названию

Популярные бренды

Schulte DHX-360, Руководство оператора

Результаты поиска

Содержание DHX-360

Отзывы:

Похожие инструкции для DHX-360

Бренды по названию

Популярные бренды