16
REMOTE CONTROL USERS GUIDE
Synchronization method of remote control:
Power on the receiver press the (6) key at the emitter at once. The learning is succeeded, when
hear double beep ringing from the loud speaker.
RF wireless digital transmission technology is adopted to realize the one-to-one control providing a
rate of coincident
Notices
1 .When the remote control fails, please check whether the switch batteries are in good contact,
whether they are fixed properly and whether they run out of use.
2. When the remote control fails, please check whether there is other remote control products
around the space and check whether the keys are pressed down, because same nature of remote
control product may cause interference with each other resulting in poor receiving effect. Taking
away such articles will normalize the remote control function.
3. Too low voltage in battery will lead to failure of the remote controller to work (Please refer to the
product label for the voltage range and related parameters).
4. Please take out the batteries if you will not use this product for a long time.
