6
OPERATING INSTRUCTIONS
S-U-UNOPOL
Item no. 15 210 Serial no. G7 - ... /G70 - ...
Small electrolytic polishing unit for Cr-Co-alloys
Dear customer,
By purchasing a product from SCHULER-DENTAL you habe decided on a high quality product.
Please read these operation instructions carefully before and during using this device for the first
time to achieve good results from the very beginning.
Please pay particular attention to the notes highlighted with these singes.
Table of contents
Point
Subject
Page
1.
Area and purpose of use ...................................................
6
2.
Set up................................................................................
7
3.
Starting up and operating mode .......................................
7 - 8
4.
Set-points ..........................................................................
8
5.
Important notes .................................................................
9
6.
Technical Data ..................................................................
9
Add.:
EU-Declaration of Conformity, appliance certificate, warranty certificate
13 - 15
Spare parts catalouge
10 - 12
1. Area and purpose of use
S-U-UNOPOL is a polishing unit specially developed for dental appliances. By means of this
device, dentures of Co-alloys can be polished through electrolytic material ablation.
By its compact construction S-U-UNOPOL is particularly suitable to cover a smaller demand and
for single workplaces. Its maximum polishing current of 5 Ampere is completely sufficient to polish
a total Cr-Co denture base.
= General advise for safety
= Advise for electrical safety
By the way:
Since we always strive to improve and further develop our products, we will be very pleased to receive your suggestions and ideas for
improvements.
