17
4. Accessories.
4.5 Handles
If the
dynamic pacer
is used as an anterior
gait trainer, it is recommended to mount the
handles (
A
) in front of the cross strut (
B
) of the
top frame (
C
). This creates stable positioning
and leaves sufficient space for further ac-
cessories. To mount the handles (
A
), proceed
as follows:
1. Release the twist grip (
D
) and press it
upwards.
2. Open the bar (
E
).
3. Position the handle (
A
) onto the frame
and close the bar (
E
).
4. Press the twist grip (
D
) up again and
re-tighten it.
The positioning of the handles (
A
) on the fra-
me is dependent on the position of the user,
their physical capabilities and the quantity
of mounted accessories.
Adjust the angle of the handles (A):
• Pull the clamping lever (
F
), upwards, move
the handle (
A
) to the required angle and
then push the clamping lever (
F
) down again.
Release the twist grip (D) to:
• push the handle (
A
) back.
• remove the handle (
A
).
To prevent injuries, do not mount the handles
onto the foremost end of the top frame (G)!
Then firmly re-tighten the twist grip again after
each setting/adjustment!
A
B
C
F
D
D
E
G
Содержание rifton dynamic pacer
Страница 1: ...Instructions for use dynamic pacer The dynamic gait trainer dynamic pacer ...
Страница 42: ...42 Notes ...
Страница 43: ...43 Notes ...
Страница 44: ...schuchmann de GA 33 EN_1 0 ...
