14
4. Accessories.
4.1 Distance measurement system
The distance measurement system (
A
)
shows the distance covered. To reset
the distance measurement system to
"
0", press the reset button (B). In order
to display the entire distance cover-
ed, press the reset button (
B
) for one
second. The distance can be shown in
metres (m) or feet (ft). In order to alter
the distance unit, keep the button (
B
)
pressed until the unit changes.
4.2 Adapter clamp for accessories
A large selection of the accessories are mounted onto the top frame using
an adapter (
C
). To mount the adapter (
C
), proceed as follows:
1. Release the handle (
D
) and press it
downwards.
2. Lift the bar (
E
) up.
3. Position the adapter (
C
) onto the
frame and close the bar.
4. Press the handle (
D
) up again and
re-tighten it.
The positioning of the accessories on
the frame is dependent on the posi-
tion of the user, their physical capa-
bilities and the quantity of mounted
accessories. In case of thinner users,
the accessories can also be mounted
on the inside of the top frame (
F
).
Then firmly re-tighten the screws again
after each setting/adjustment!
A
C
E
D
F
B
Содержание rifton dynamic pacer
Страница 1: ...Instructions for use dynamic pacer The dynamic gait trainer dynamic pacer ...
Страница 42: ...42 Notes ...
Страница 43: ...43 Notes ...
Страница 44: ...schuchmann de GA 33 EN_1 0 ...
