15
4.2 Quick release axle
The quick-release axles of the rear
wheels make transporting your
floyd.
significantly easier. You only need to
press the button (
A
) in the centre of
the wheel hub, and the wheel can be
easily removed or reinserted. When
inserting the quick release axles, you
should be able to hear it engage with
an audible "click".
Check the tight axial fit of the quick release axle each time the rear wheel is
mounted!
4.3 Wheelbase
If the rear wheels are mounted far
back (
B
), you have a large distance
between wheels and therefore good
stability, or a safe position with res-
pect to the danger of tipping over.
However, manoeuvrability is lost. If the
rear wheels are mounted further to the
front (
C
), the
floyd.
is very manoeuv-
rable due to the shorter wheel distan-
ce. However, please note that there is
a big risk of tipping over in this positi-
on. This particularly applies if the seat
surface is adjusted backwards (see
Point 3.5
). Therefore always use the
swing-away anti-tip mechanism due
to safety reasons (see
Point 5.2
).
To adjust the wheel distance, please
remove first the rear wheels (see
Point
4.2
) and then remove the brake anchor
and the clothing guard (if available).
Now loosen the screws (
D
) and bring
the perforated plate (
E
) into the requi-
red position.
After each adjustment, please re-tighten all screw
connections!
4. Handling of wheels.
A
D
E
D
B C
Click!
