SCHOTT KL 200 LED, Руководство по эксплуатации, Страница: 19 / 40

KL 200 LED – Operating instructions
PI_69
9/10
Details on the focusing attachment and available standard filter types can be found in our
catalogue.
Adapters for attaching the KL 200 LED to microscope objectives and swivel arm stands are
available, either with this light source or they can be ordered separately. Please see our catalogue
for further details on each type.
The light source can also be used as a “stand-alone” instrument if the light source is not mounted
on an objective or a swivel arm. When using flexible light guides no accessories are required (see
Point 2.1 “Assembly”). A base with a corresponding fixing devise is available for use with self-
supporting light guides. Please also refer to our catalogue for more information.
6. Technical data for KL 200 LED
Properties Values
General information
Type description KL 200 LED
Dimensions (W x D x H) mm approx. 106 x 114 x 59
Weight kg approx. 0.35
Cooling Convection
Ambient temperature* °C + 5 ... + 40
Relative air humidity* % at 31°C ambient temperature: 85%
From 31°C to 40°C ambient temperature:
decreasing linearly to 75%
Air pressure* hPa 700 ... 1060
Transport and storage
Temperature °C
Rel. air humidity %
Air pressure hPa
-20 ... +70
10 ... 95 (non-condensing)
500 ... 1200
Contamination level 2
Electrical information
Operating voltage, frequency 100 - 240 V ~
50 - 60 Hz
Power consumption, max. VA max. 5
Protection class
II
Overvoltage category
II
Diode LED, Luxeon Rebel
LED nominal output W 3
Average LED lifetime LED
Level 5
h 50,000 (luminous flux reduced to 70%)
* Test conditions of DIN EN 61010-1 and UL61010-1 standards