Page13
Page14
Instruction of Using Our Products
Instruction of Using Our Products
2. FM Function:
(1). Pull out the antenna and set it as Y type, press ( ), the screen shows FM frequence,
the volume indicating as DB increases to
00dB
from
08dB
.
(2). Press( )key to upward tuning, interval press is for manual selecting. If the key is held
for over 2 seconds, the frequency will stop at the channel the digital founds.(Notice: You
can press( )key for upward and press( )key for downward. In the case of the weak
signal, manual selecting is suggested.) Press( )key when a channel is selected, the
screen will show
P----*
, and the channel will be memorized.(Notice: The
*
of the
P----*
is positioned memory number, the capacity of memory is 10.) If the received
signal is weak, unfold the antenna and readjust. Press( )key to select the channel you
like after setting.
(3). Volume Control: Press the volume( )or( )to adjust the volume, the correspondent
DB will be indicated in the screen.
Connect the CD audio wire with the external socket of the main control box, press
CD/RADIAO for CD function, then choose the desired volume by pressing (VOL+) or
(VOL-).
3. External CD:
.PRECAUTIONS:
4. Key Description:
(1). It is the store function after pressing ( ) or after station selection; and direct pressing
of the( )key is selecting the channels that have been memorized.
(2). (VOL+) and (VOL-) Function: it is for temperature adjustment when the radio and CD
functions are ineffective, while the radio or CD functions is effective, it is for volume
adjustment; when the radio function is effective, press( ), it is for station selection.
(3).It is for tuning upward function, and also the station searching function by pressing
(VOL+) or (VOL-).
1. The installation should be carried out by a qualified technician and creepage protector
should be installed in the place easily to be controlled.
2. The electronic parts should be well grounded, otherwise, the manufacturer will not be
liable for any loss or consequences occurred.
3. The load capability of the power supply should be considered during installation, or it
affects the normal operation of the product or may lead to accident!
4. For any functions can not be activated through the ways mentioned above, please
contact a certified technicians or local dealer.
5. If you don't use the product for a long time, please disconnect the main power supply.
