Page11
Page12
Instruction of Using Our Products
Instruction of Using Our Products
(3).
:
Bubble Bath
Press this button ( ) on the panel to switch
on/off bubble bath function and the indicator
related will be on/off accordingly.
(3).
( )
Bubble Bath
Please Press
Key
(5).
( )
Underwater Light
Please Press
Key
(4).
Ozonation
Please Press ( )Key
(4).
:
Ozonation
Press ( ) to turn on/off this function and the
indicator related will be on/off accordingly.
(Remarks: each time the ozonator works for 10
minutes, after10 minutes,the system shut it off
automatically.)
Press ( ) to turn on/off the light and the
indicator will be on/off accordingly.
(5). Underwater Light:
Press the ( VOL) button to set the water
temperature in the tub, the setting ranges: (20
-
50
). Press (VOL+) to increase the preset
temperature, press (VOL-) to decrease the
temperature and the screen shows accordingly.
(Remarks: For this function, FM & DC should be
turned off first, otherwise, it is for volume
adjustment) Preset Temperature by factory: 45
(6).Temperature Setting:
(6).
Temperature Setting
VOL
Please Press The (
) Key
. TECHNICAL DATA
1. Voltage: AC220V 10%, 50Hz
AC110V
10%, 60Hz
2. Power: 3500W
3. Dielectric Strength: 1500V, 1min
4. Lighting Load:AC12V, 20W
5. Music Power:
15W
6. Frequency Range: FM88-108MHz
7. S/N Radio:
45dB
8. AIR PUMP: AC220V50Hz 1kW
9. HEAT POWER: AC220V50Hz
1.5kW
10. :
AC12V
20W
11. WATER PUMP: POWER
1kW
Ozone
. OPERATION MANUAL
Surfing Operation: Connect the creepage protector,
press ( ), the system starts to work, LCD screen
shows the actual temperature. At this moment, you
can select the functions desired; Press ( ) to turn
off the system.
1. Power:
Press (
), the pump is turned on, and the LED
indicator is on correspondingly; press again (
)
to turn off the pump; (Notice: When there is not
sufficient water in the tub, the system will shut off
the pump and the indicator will flash until the water
level reaches the standard)
(1). Water Pump
Please Press
Key
( )
(2). Heater
Please Press ( )Key
(1). Water Pump:
The water pump has to be activated before using
the heater.
The computer establishes(45
). Press
again( )key, heat function to OFF.
(2). Heater:
Power on/off
Please Press
Key
( )
