8
GB
Getting started &
using your oven
Before using the oven for the first time, heat it to maximum
temperature, empty, and leave it on for at least one hour,
with the door closed. Then switch it off, open the oven door
and air the room.
The smell is caused by the evaporation of products used to
protect the oven.
Never place objects on the oven floor, as this may damage
the enamel.
Dishes must always be placed on the grids supplied with
the appliance.
When baking cakes or breads that rise, it is best not to
open the door during cooking, to prevent sinking.
Prolonged pressure on the
- and + buttons causes
the display to run quickly through the lists or values that are
being adjusted.
Each time the oven is switched on, the CREATION menu
appears.
If, when the display switches on, the user does not activate
any button, the screen will switch off automatically after
30 minutes.
Cooling system
To cool the temperature outside the oven, a cooling system
blows out air via a slot located above the oven control
panel.
At the end of cooking, the fan switches itself on and stops
automatically, when the oven has cooled down sufficiently.
Oven lighting
When the oven is off, the light switches on when the door is
opened.
Using your oven for the first time
After connecting the oven to the mains and running it empty
(see above), activate the control panel by pressing the
buttons:
The list of available languages is displayed in the menu.
Choose your language using the
up/down buttons:
Press “OK” to confirm. Once the choice has been made, the
following parameters are displayed:
LANGUAGE Language selection
TIME Setting the clock
SOUND Touchpad volume
TIMER Adjusting the timer
EXIT Exit from the menu
After selecting the language in the menu, if no further
operation is carried out in the following 60 seconds, the
display moves on to the CREATION menu.
Setting the time
To set the time, first press the
button to switch on the
oven; then press the “MENU” button and follow the
procedure below.
1. Select TIME and press “OK” to change the time.
2. The 4 digits will start to flash.
3. Adjust using the - and + buttons.
4. Press “OK” to confirm.
Setting the timer
The timer can be set with the oven off or on.
When the oven is off:
1. Press the “MENU” button.
2. The 4 digits will start to flash.
3. Adjust using the - and + buttons.
4. Press “OK” to confirm.
If the oven is on:
1. Press the “MENU” button.
2. Select TIMER and press “OK” to change the timer.
3. The 4 digits will start to flash.
4. Adjust using the - and + buttons.
5. Press “OK” to confirm.
6. Once the timer has been set, the oven may be switched
off.
The timer is displayed: once the time is up, the oven beeps
for one minute or until any of the icons is pressed.
The timer does not control the switching on or off of the
oven.
Child safety device
The child safety function can be used to lock the oven
controls.
To activate the child lock, press the
button, select
ACTIVATE and press “OK” to confirm. To dsactivate the
child lock, follow the same procedure but select
DESACTIVATE. The child lock may be activated whether the
oven is on or off. The child safety device may be deactivated
when the oven has finished cooking and in all situations
described above.
