GBA Z 0675 2 E
BA
Page 6 of 29
November 9, 2020
Last revised 11-2020
Rev. 2
Scho
ll Ap
parat
eb
au
G
mb
H &
C
o
.
KG
1.2 P
URPOSE OF INDUCTION UNITS
The induction heat retention units „RTCSmp Install Hold-Line“ are especially suitable as built-in units in
closed counters. The heat retention process with this „RTCSmp Install Hold-Line“ unit is especially adjusted
to the SCHOLL GN equipment. If other material is used, efficiency and function can be affected in a negative
way.
Make sure that the GN-Container is put in the center of the ceran surface. For holding liquid, it is required
to use a lid. For an amount of more than 4 litres it is recommended to use another high capacity unit.
1.2.1 G
ENERALL INFORMATION ON
GN
C
ONTAINER
GN Container bottom must be ferritic, with a minimal thickness of 2mm and a minimal diameter of
20cm.
The bottom shouldn’t be bigger than the ceran glass, to avoid an overheated display.
If a ceramic GN Container is used, a ferritic coating on vessels bottom is required.
The GN Container must havea direct contact to the glass. Bottom must be flat without any structure.
When using open containers, we recommend the additional use of heat lamps to ensure the top heat.
When using inappropriate GN Containers, performance and function may be adversely affected.
