Operating manual 810523-BAL-EN-220609
Status 06.09.2022
Seite 10 von 12
6.5. Settings
Here you get to the settings and can choose from the following entries:
6.5.1 Timer
Here, the measuring timer can be displayed at the lower right edge of the screen.
To do this, select the "Timer" entry and press the (I) button down.
Then select the "Yes" entry and confirm by pressing the (I) button downwards.
6.5.2 Vibration
Here, the vibration of the handle can be switched on and off to confirm a success-
ful measurement.
To do this, select the "Vibration" entry and press the (I) button down.
Then select the "Yes" entry and confirm by pressing the (I) button downwards.
The device vibrates briefly to confirm.
6.5.3 Date
Here you can set the date and time.
To do this, select the "Date" entry and press the (I) button down.
The individual digits can be set by pressing the (I) button upwards.
By pressing the (I) button downwards, the cursor always moves one position to the
right.
After all positions have been set correctly and the cursor is at the last position, you
will be asked whether you want to cancel or confirm. Please make your selection
by pressing the (I) button upwards and confirm by pressing the (I) button down-
wards.
6.6. Calibration
This entry is protected with a password and is used exclusively for calibration by
SCHNIER Elektrostatik GmbH.
