manualshive.com logo in svg

Schneeberger MINIRAIL, Руководство пользователя

Поделиться
Скачать
Schneeberger MINIRAIL Скачать руководство пользователя страница 6

6

3

3.1.  Authorized Staff

MINIRAIL and MINISCALE PLUS must only be assembled by appropriately trained 
specialists who have read and understood these instructions.

3.2.  Intended Use

MINIRAIL and MINISCALE PLUS can only be exposed to the approved environ-
mental influences (see MINI-X product catalogue, MINIRAIL and MINISCALE PLUS 
technical information)

3.3.  General Safety and Protective Measures

•  The power supply should be disconnected prior to any work on electrical 

equipment.

•  ESD regulations should be observed when handling ESD-vulnerable parts (EN 

100015-1).

•  Country-specific regulations, standards and guidelines for accident prevention 

must be observed.

3.4.  Environmental Protection

•  Lubricants should be disposed of in an environmentally responsible way.
•  Decommissioned components should be disposed of in accordance with local/

national laws and guidelines.

 Safety Instructions        

www.servo2go.com

[email protected]

www.servo2go.com

Toll Free Phone: 877-378-0240

Toll Free Fax: 877-378-0249

[email protected]

www.servo2go.com

Sold & Serviced By:

Содержание MINIRAIL




































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды