34
5 Service and Maintenance
The tension meter is easy to maintain. Depending on operating time and load, the ten-
sion meter should be checked according to the locally valid regulations and conditions
(as described in Chapter 3.6). The use of other test methods than the procedure de-
scribed in Chapter 3.6 may cause deviating measuring results.
6 Cleaning
For cleaning the unit, do not use any
AGGRESSIVE SOLVENTS
such as trichloroethylene or similar chemicals.
NO WARRANTY OR LIABILITY
shall be accepted for damage resulting from improper cleaning.
4.2 Terminal program
The contents of the memory can be transferred to a PC using the USB interface of the
tension meter.
Connect the ETX/ETPX to the computer using the USB cable type K50202 which is sup-
plied with the tension meter.
Prerequisites
:
A communication program, such as Terminal, must be installed and configured on the
computer.
PC communication commands (polling)
Requesting data:
(data is requested by PC polling)
- The ASCII character “r” is used to transfer the contents of the memory to the PC.
