5
Model
Measuring Range
daN
SCHMIDT
Calibration
KXE-20
0.5 - 20.0
fabric tape
KXE-50
0.5 - 50.0
fabric tape
1.8 Copyright
The copyright on these Operating Instructions remains with the company
HANS SCHMIDT & Co GmbH.
These Operating Instructions are intended for the operating company and its personnel
only. They contain instructions and notices that may only be reproduced on the prior writ-
ten permission of
HANS SCHMIDT & Co GmbH
and under indication of the complete reference data.
Violations will be prosecuted.
1.9 Declaration of Conformity, RoHs II and WEEE Registration
In compliance with the EU Directives 2004/108/EG and 2011/65/EU
HANS SCHMIDT & CO GmbH is registered in compliance with
the German Electrical and Electronic Equipment Act (ElektroG)
under WEEE Reg. No. DE 48092317.
2 Available Models
2.1 Specifications
Display Unit:
Calibration
:
According to SCHMIDT factory procedure
Units of Measure:
daN
Accuracy:
± 1% FS* ± 1 digit (typically ± 0.5% FS*)
Overrange:
10% FS*, without accuracy guarantee
Overload Protection:
200% FS*
Measuring Principle:
Strain gauge bridge
Signal Processing
:
Digital 24 bit A/D converter
Damping:
Adjustable electronically (averaging)
Measuring Frequency
:
Approx. 1 kHz internally
Display Update Rate:
2x per second
Display:
4-digit LCD, height of digit 11 mm
Memory:
Average, last value, MAX, MIN, MAX
PEAK
, MIN
PEAK
Memory Modes:
4 - for up to 4000 readings
Temperature Coefficient:
Gain: less than ± 0.01% FS*/°C
Analog Output Signal:
0 - 2 V DC (linearized) R
Load
> 1 k
W
± approx.1%
(optional)
Converter frequency 100 Hz
Digital Output Signal:
USB
Temperature Range:
10 - 45 ° C
Air Humidity:
85% RH, max.
Auto Power Off:
Automatically after approx. 3 min. of non-use
Power Supply:
LiPo accumulator (approx. 60 h continous use, charging time
approx. 3.5 h)) and AC adapter 100 - 240 V AC
with 3 adapters (EU/USA/UK)
Housing Material:
Aluminium profile with plastic outer casing (PVC)
Housing Dimensions:
197 mm x 58 mm x 47 mm (L x W x H)
Weight,
net (gross):
Approx. 340 g / 1250 g
*FS = Full Scale
