31
12. Output
12.1.2. Data transport
Transport data in the internal memory to USB memory.
The following message shows up during transport. (Do not remove the USB memory.)
The message disappears when transport ends.
* Data in the internal memory is not deleted when transported. Please delete it when needed.
* Please refer to the page 47 for file format of USB memory.
* The data is transported to the new file of USB memory. (Not re-written)
● Do not disconnect USB memory during transport.
●Please make sure to follow the direction to disconnect USB memory, otherwise data can
be lost.
12.1.3. Data saving at real time
When either Cont-Data 100, 50, or 1Hz is selected under [USB Memory]
‐
[Save Data Setting] settings,
the real time data is saved to the connected USB memory. The data cannot be saved in the internal
memory.
The saving speed is 100, 50 or 1 data per second according to the settings.
Starting / stoping saving
While
(MEM sign) is on, press
(SEND button) to start saving data in USB memory. Press
(SEND button) again to stop recording and save.
(MEM mark) blinks during saving.
* Please refer to page 47 for the file format of the data saved in USB memory.
*This operation saves data as a new file in USB memory. (It does not overwrite an existing file.)
Export to USB
USB Memory
Program Menu
●
The recommended settings of inverval is 50 /sec or 1 /sec when recording to USB
memory for a long period of time.
●
Recording may stop due to USB memory capacity, speed or other factors.
●
Some USB memories may show error message during recording.
●
It is recommended to connect to PC and use our optional software Force Recorder for
stable consecutive recording.
