schmersal USP-PI, Инструкция по эксплуатации

Страница: 43 / 60

43
Parallel interface USP-PI
6
Input levelling values manually
You can input levelling values manually on the basis of the di-
mensional drawing of the elevator unit with the ”Manual input”
menu. All values correspond to the distance between transmit-
ter and receiver.
Navigate to menu item ”Input levelling values” on the
basis of the menu structure.
6
Esc
Back one step with
Setting value: 1 mm - 140.000 mm
Setting value: 1 - 45 levelling values
The subsequent procedure is explained
in item 5 ”Calculate shaft copy”.
enter
levelling values
calculate
shaft copy
enter
levelling values
teach-in drive
manual input
delete existing
values? no
delete existing
values? yes
levelling values
deleted
USP-receiver
top
USP-receiver
bottom
levelling value 1
0 mm
levelling value n
0 mm
calculate
shaft copy
levelling value 1
000000 mm
levelling value n
000000 mm