Schlumberger Reflex 72, Руководство по установке

Страница: 17 / 36

Installing on Windows 98 or Windows Me
Reflex 72 Reader Installation Guide
13
Step 3: Reboot the computer
The Smart Card Resource Manager detects the Reflex 72 smart card reader
only during reboot. Therefore, although you might see the Reflex 72 smart card
reader listed in the Device Manager as an installed device after you complete
step 2, the Reflex 72 smart card reader is not usable until you reboot.
These are other situations that require you to reboot your computer:
•
If you connect the Reflex 72 smart card reader in mid-session, the Smart
Card Resource Manager is unaware of the change until you reboot.
•
If you reconnect the Reflex 72 smart card reader after removing it, the
Reflex 72 smart card reader does not function until you reboot.
•
If you remove the Reflex 72 smart card reader without first stopping the
device, these errors display:
Reader removal monitor error retry threshold
reached. The parameter is incorrect.
Reader monitor ‘Schlumberger Reflex 72 0’ received
uncaught error code: The parameter is incorrect.
To make the Reflex 72 reader functional, reconnect it and reboot.
At this point you are ready to start using the Reflex 72 smart card reader. You
can test the reader setup using the Smart Card Reader Tools. From the Start
menu on the Windows taskbar, select
Programs
→
Schlumberger Smart
Cards and Terminals
→
Smart Card Readers
→
Tools .