Schleuniger EcoCut 3300, Справочное руководство

Страница: 64 / 108

11. Maintenance / maintenance schedule
64|108
Reference Manual |Edition 4.0 (10-2013) |EcoCut 3300
1» Switch on the machine.
2»
5
Based on the main menu go to the menu "Password" with the key
[5]
.
3» Select
[1]
„Level“.
4» With
[@]
select the password level "Supervisor".
5»
[ENTER]
6» Enter password.
7»
[ENTER]
8» 2 x
[MENU]
9»
4-1
Based on the main menu press the key
[4]
"Diagnosis".
10»
[1]
Info.
11» Press the following key combination, to get
access to the screen "Back to factory defaults".
12»
[SINGLE]
13»
[DEL]
14»
[ENTER]
15»
[3]
„f“
16»
[2]
„a“
17»
[2]
„c“
18»
[8]
„t“
19»
[6]
„o“
20»
[7]
„r“
21»
[9]
„y“
22» [OK]
23» The machine restarts in the native state.
11.9
MAINTENANCE / REPAIR WORK
11.9.1
General / safety
The instructions in this chapter must be carried out by a
technical specialist
!
WARNING
Electric current!
For any maintenance and repair work on the machine, it must be turned off,
locked against switching on again and the power cord must be removed. Dan-
gerous line voltage is present inside the machine and around the area of the
mains socket, which can lead to serious injury or death if disregarding.