Schleuniger CCM 1200, Руководство по эксплуатации

Страница: 26 / 51

26 Schleuniger CCM 1200
Single piece function
This enables you to process single pieces via a connected pedal without pressing [run]. In
addition to the control input assignment, the function is activated as follows:
•
Hold down both [speed] keys when switching on the automatic unit. (Or press [5], if the
machine has already been switched on).
•
The word CODE ? appears in the display.
•
Release the [speed] keys.
•
Enter 20.
•
Press [enter], then [STOP].
For safety reasons this individual step function only remains activated until the machine is
switched off.
Figure 6. Single piece function
When the control contact S2 closes the LED above the [run] key lights up. Once the control
contact S2 opens the single piece is processed and the LED goes out. The CCM 1200 also
takes into account the programme quantity when carrying out this function. Once the required
quantity has been processed the words END OF PROGRAM appears in the display.
S2
+ 24
1
2
4
5
Socket Wire Marker