Commissioning
Operating Manual ProNumeric XCI 600 Version 07/16
27
The IP addresses can be specified in the
Resource settings for XCI 600
dialog box (see: Figure 15).
After creating a new project, you will find the following specifications in the
resource settings:
Figure 13:
Resource settings
MULTIPROG
specifications
The alias addresses vxTarget and vxHost can be maintained as they are,
and then you will need to assign the appropriate IP addresses in the hosts
file under Windows. You can find the hosts file under
C:\Windows\System32\Drivers\etc.
Figure 14:
Entering the IP
address
in the hosts file
It is also possible to enter the IP addresses directly:
-ip192.168.212.2 -TO2000 u=pc_cnc pw=pp
ipftp=10.208.3.212
Figure 15:
Entering the IP
address
in MULTIPROG
u = User name
pw = Password
