6
Installation Instructions for Escutcheon Trim
Continue for installation instructions for
your lock with escutcheon (Addison)
trim.
For sectional
(Greenwich) trim
instructions go
to page 3.
1
Install chassis.
Route chassis connector through the upper 5/8” hole on the
interior
side
of the door, and pull through the slack as you slide chassis into mortise.
You may use needle-nose pliers to gently pull the cable through the hole.
NOTICE
Start screws but
don’t fully tighten
until Step 9!
INTERIOR
Hole
2
Install lever spindle on the exterior side of the door.
Install spring on lever spindle.
EXTERIOR
3
Install mounting posts and spring cage.
Arrows on the spring cage points in direction of lever down rotation. Use
pliers to carefully install mounting posts to avoid damage.
NOTICE
Arrows in direction
of lever down
rotation.
4
Install the outside trim and route wire all the way through
the hole to the interior side of door.
Route wire from
outside trim above
wire from the chassis.
