KC9232/KC9232-2 & KC9233/KC9233-2 INSTALLATION
Installing the KC9232/KC9232-2 or KC9233/KC9233-2
57041-D Page 13 04-11-2007
If this is a retrofit installation, continue with,
Prepare the Door: on this page
. Otherwise, skip
to,
Prepare the Exterior Gasket: on page 14
.
15) Prepare the Door:
If you are installing a prep cover plate, continue with,
Install the Interface Spacer: on page 13
.
Otherwise, skip to,
Install the Interface: on page 14
16) Install the Interface Spacer:
•
Apply the self-adhering transparent template onto door as
follows:
> Line up template with existing cylinder hole.
> Vertical guidelines must be
parallel
with vertical edges
of door.
NOTE: The vertical lines are for vertical guidance only, Do not
overlap with edges of door. Make only parallel to door edges.
> If necessary, lift off template and reposition.
•
Drill and tap holes.
NOTE: If optional blind nuts are used, see blind nut installation
instructions (Schlage Lock Company form number: 57057) for
correct hole size and mounting method.
IMPORTANT: This step to be performed ONLY if installing
a prep cover plate.
•
Place interface spacer (
a
) onto baseplate.
•
Place prep cover plate onto door.
NOTE: Both parts are included in the prep cover plate kit.
a
