5
Mounting Options
1
Remove mounting plate from
Gateway.
Slide mounting plate down to remove.
2
Choose mounting option.
There are four different mounting options.
2
2
3
4
4
4
4
3
1
Desk mounting:
Does not require screws.
Replace mounting plate, and place on flat
surface, mounting plate down.
2
Wall mounting:
Place the mounting plate
against the wall in the desired location and
mark the indicated holes with a pencil.
3
Single gangbox mounting:
Place the
mounting plate with the holes aligned with
the screw holes in the gangbox.
4
Double gangbox mounting:
Place the
mounting plate with the holes aligned with
the screw holes in the gangbox.
3
Route wires.
Route wires through top hole in mounting plate.
Wire hole
IMPORTANT
Leave some slack when routing wires through
mounting plate to avoid damaging wires.
4
Secure mounting plate.
Use #6 screws to secure mounting plate to wall or
gangbox. Use the holes indicated on step 2.
5
Install wire cover.
Align the notches on the wire cover to the
Gateway, then slide straight in.
Do not pinch
wires!
