Form 55005 Rev. B
09-25-2001
7
CM5500 COMPUTER MANAGED MORTISE LOCK
INSTALLATION MANUAL
ASSEMBLE SPRING ONTO
INSIDE SPINDLE AND INSERT
INTO CAM IN LOCKSET AS
SHOWN
INSIDE ESCUTCHEON
PHILLIPS SCREWS
(
STANDARD
)
OR
NO
.6
SPANNER
SCREWS
(
HSS OPTION
-
NOT
SHOWN
)
7. INSTALL INSIDE SPINDLE, BATTERIES, AND INSIDE ESCUTCHEON:
NOTE: The lock is shipped with four AA alkaline batteries. Always use new, high quality alkaline batteries.
A. Plug wiring harness into PC board.
B. Tuck wiring harness under retaining clip as shown in detail A, below. Not all wires shown will be present on all models.
C. Install four AA batteries. Note polarity indication on battery holders.
D. Assemble spring onto inside spindle as shown. install spindle into cam in lockset. Note that the flat side faces away from
the door (See detail B).
E. Install inside escutcheon, making sure that the inside spindle engages the lever cam.
F. Test operation of inside lever to make sure that latch retracts fully.
DETAIL B
WIRE HARNESS
RETAINING CLIP
DETAIL A
INSIDE
IBUTTON WIRE
HARNESS
WIRE HARNESS
(
PRIVACY ONLY
)
WIRE HARNESS
(
STANDARD
)
