Form 55005 Rev. B
09-25-2001
6
CM5500 COMPUTER MANAGED MORTISE LOCK
INSTALLATION MANUAL
6. INSTALL OUTSIDE SPINDLE, OUTSIDE ESCUTCHEON AND BASE PLATE ASSEMBLY:
Install base plate assembly onto inside of door. Use socket cap screws with washers on top standoffs and phillips head
screws on retractor assembly (bottom). Note that the cam on the outside escutcheon must be positioned with the dot at the
6 O’Clock position and inside spindle must be inserted as shown in details.
CAUTION!
If any fasteners such, as washers,
fall behind the PC board, remove
them prior to installing batteries.
INSIDE SPINDLE MUST BE
INSERTED AS SHOWN
SOCKET CAP
SCREW
,
WASHERS
BASE PLATE ASSEMBLY
PASS WIRING HARNESS THROUGH
1”
HOLE IN DOOR
PHILLIPS HEAD
SCREWS
DOT
-
FACES
DOWN
OUTSIDE
SPINDLE
POSITION
CAM
DETAIL
