Schlage ALLEGION MT20W, Руководство пользователя

Страница: 10 / 36

10 • Schlage • MT20W Enrollment Reader User Guide
Error Codes
1 red flash to
solid red with
one short beep.
Failed connection to
Wi-Fi.
Check Wi-Fi network settings within
the ENGAGE™ Mobile application.
Error Codes
Error
Number
Error Error Display Error Description
401 USB not
commissioned
The device is not
commissioned.
Please
commission the
device using
mobile app.
This error will occur
whenever device not
commissioned but tries
to operate MT20W. Try
switching to Wi-Fi mode hit
save then switch back to
USB mode hit save. Also
make sure you are logged
into the correct account both
on MAPP and desktop app.
402 USB card read
failure
Read failure.
Present the card
again.
Generic card read failure like
removing card too early.
406 USB timestamp
update failure
Update error.
Please try again.
Failure to update last
connected time.
407 USB HTTP
status bad
request
HTTP bad
request. Please
try again.
This will occur if sectors are
full on card.
409 USB HTTP
status not found
URL not found.
Please try again.
URL was not found.
410 USB HTTP
status credential
not associated
Credential not
assigned. Assign
and try again.
Credential present in the list
but not assigned to any lock.
Be sure device is updated
with most recent firmware.
415 USB invalid
no-tour data
received
Invalid no-tour
data received.
Please try again.
Whenever content length is
zero and HTTP response
200 received.
416 USB no-tour
write failure
Write fail. Please
try again.
Generic error for no-tour
write fail.