manualshive.com logo in svg

Schiller Grounds Care LITTLE WONDER monster Truckloader 8143-06-01, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
Schiller Grounds Care LITTLE WONDER monster Truckloader 8143-06-01 Скачать руководство пользователя страница 18

1

6

TRUCKLOADER

MAINTENANCE / STORAGE

DAILY MAINTENANCE

-

 Inspect the intake hose connector to make sure it

is securely fastened to the intake cover assembly

-

 Inspect the hose, chute, chute liner, and housing

liner for wear.  Replace worn parts or have them

repaired.

-

Tighten any loose fasteners.

ENGINE OIL

-

Check the oil level daily.

-

 Change after the first day of operation and then

according to the engine manual.

-

 See the engine manual for oil specifications and

checking procedure.

ENGINE AIR CLEANER

-

 Check and clean according to the engine

manuals.

-

 Little Wonder recommends daily inspection and

cleaning due to the extreme environment of

debris handling.

CLEANING

Keep the area around the muffler and engine 

recoil cover /cooling air intake free of debris 

accumulation to prevent fires and keep the engine 

from overheating.  These areas need to be monitored 

throughout the work day and may need to be cleaned 

several times daily depending on circumstances.

HOUSING LINER REPLACEMENT

-

Before replacing liner stop engine.

-

Put engine switch in OFF position.

-

 Remove spark plug wire so fan movement

cannot inadvertently start engine.

-

Remove hose from blower inlet.

-

 Remove nuts securing blower inlet assembly and

open blower inlet assembly.

-

Remove liner retainer.

-

Remove the old liner.

-

 Install the new liner with the thick rubber side

towards the fan. Use new bolts and washers.

Start at one end and work around the housing

leaving the fasteners loose until all the fasteners

have been installed. Then tighten the bolts until

the washer is slightly drawn into the rubber. Do

not over tighten

-

 Reinstall liner retainer. See parts list for locations

of carriage bolts.

CHUTE LINER REPLACEMENT

-

Before replacing liner stop engine.

-

Put engine switch in OFF position.

-

 Remove spark plug wire so fan movement

cannot inadvertently start engine.

-

 Remove chute from blower housing.

-

 Remove rubber plugs from access holes on the

bottom of the chute.

-

 Remove nuts, washers, bolts then remove old

liner.

-

 Feed the new liner into the chute. Using new

bolts and new washers on the inside, and new

washer and new nuts on the outside, install new

fasteners working in from each end. Leave the

bolts loose until all fasteners are installed. Then

tighten the nuts and bolts, working from the

inside out.

-

 Reinstall the rubber plugs.

-

 Reinstall the chute on the machine.

Содержание LITTLE WONDER monster Truckloader 8143-06-01

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды